Dating via gsm

Posted by / 27-Feb-2017 13:49

Dating via gsm

You can confirm whether the modem is in CLTS mode by sending AT CLTS?

22 indicates the time zone expressed in quarters of an hour, between the local time and UTC; range -47 to 48. In 5 hours and 30 minutes there are 22 quarters of an hour.

I want to know what AT command should be sent to the modem to get time? But I need to set it automatically through cell tower.

The tower can send the time to the modem when requested using an AT command.

There are many different factors that affect battery life including the brand of battery, temperature, amount of pictures taken and day vs. The exact life of batteries is no possible to quantify.

The flash range is the distance that you will be able to see in the picture when a picture is taken using the flash.

A light on the front of the camera labeled TEST will blink when the camera is detecting motion.

These AT commands are supported by the SIMCOM SIM900 and SIM800 series. Send the following AT command Now you can see after Call Ready there is a new line *PSUTTZ: which won’t be there during normal startup.

A No-Glow flash is going to produce a black and white picture and will NOT be visible in the dark.

It produces no visible light unless you are very close to the camera and will be nearly invisible in the dark.

The Samsung Galaxy A8 has a metal frame with a curvature very similar to that of the Galaxy S6, but the glass on the back has been replaced by aluminum, as is typical for the A-series.

The handset has a profile of just 5.9mm and packs a 5.7-inch Full HD Super AMOLED display, yet still manages to keep thinks on the light side weighing in at 151 grams - quite modest for a phablet.

dating via gsm-42dating via gsm-41dating via gsm-22

One thought on “dating via gsm”